XHC3240C-ABF Ultra Long-Range Colour Night Vision Camera
7,600 m detection at 0.001 lux colour night vision, ONVIF/RTSP fixed-mount surveillance camera with motorised auto back focus.
XHC3240C-ABF Technical Overview
What It Is
The XHC3240C-ABF is an ultra-low-light electro-optical surveillance camera built around a starlight-grade CMOS sensor and a long-focal-length lens with motorised Auto Back Focus, engineered to hold full-colour imaging in near-total darkness without an infrared illuminator.
Performance
Under NVESD test conditions using a 1.7 × 0.5 m human target, the camera detects at 7,600 m, recognises at 1,900 m, and identifies at 1,180 m, while holding full colour down to 0.001 lux at 25 fps and as low as 0.00006 lux at reduced sensitivity — all without auxiliary illumination.
Key Technical Features
- ONVIF-compliant streaming over RTSP with PELCO protocol support for third-party VMS integration
- 72 dB native dynamic range, extending to 100 dB with Wide Dynamic Range enabled
- AI-based body detection with global, cross-border, and regional alert zones
- RJ45 Ethernet with optional WiFi and 4G connectivity for remote or unwired sites
Platform Compatibility
The camera is suited to fixed-mast and tower installations for border surveillance, perimeter security, maritime monitoring, and critical-infrastructure protection, and integrates directly into ONVIF-based video management systems without additional hardware.
Starlight Colour Imaging
The camera retains full colour output at illumination levels far below typical night-vision thresholds, using a large-format CMOS sensor tuned for starlight conditions. This removes the need for an infrared illuminator, keeping the installation covert and avoiding the washed-out monochrome look of conventional IR-assisted cameras.
Motorised Auto Back Focus
Auto Back Focus lets installers and operators adjust focus remotely rather than climbing to a mast-mounted unit. This is particularly useful for the elevated or hard-to-access mounting locations the product is designed for.
Long-Range Detection Optics
A long-focal-length lens paired with the camera's high-sensitivity sensor is designed to extend usable detection distance well beyond typical fixed-lens surveillance cameras. The extended optical reach is intended to support wide-perimeter and border-line monitoring from a single fixed position.
AI-Assisted Alert Zones
Onboard AI body detection can be configured into global, cross-border, and regional alert zones to flag activity automatically rather than relying on constant manual monitoring. Manual zoom can extend the AI detection trigger distance further for operators who need to confirm activity at range.
Our technical team provides pre-sales support for system integration planning, field testing, and deployment assessment.
Contact Technical TeamFull Technical Specifications
| Parameter | Specification |
|---|---|
| GENERAL | |
| Model Number | XHC3240C-ABF |
| Product Series | XHC3 Series |
| Product Type | Ultra Long-Range Low-Light EO Surveillance Camera |
| OPTICAL | |
| Sensor Type | CMOS (EO/Ultra Low Light) |
| Sensor Size | 1.13 inch |
| Resolution | 2,560 × 1,440 |
| Focal Length | 240 mm (equivalent) |
| Aperture (F-number) | F1.7 |
| FOV Horizontal | ≈9° |
| MECHANICAL | |
| Dimensions | 213 × 102 × 102 mm |
| Weight | 1.46 kg |
| ELECTRICAL | |
| Operating Voltage | 12 V ± 3 V (9-15 V), optional PoE |
| Power Consumption | < 2.0 W normal / < 3.3 W peak (WiFi + AF active) |
| ENVIRONMENTAL | |
| Operating Temperature | −40 °C to +70 °C |
| Storage Temperature | −55 °C to +85 °C |
| FEATURES | |
| Noise Reduction | 3D Noise Reduction |
| Image Stabilisation | Electronic Image Stabilisation |
| Defog / Dehaze | Fog Penetration Enhancement |
| SDK Support | Available on Request |
| DRI PERFORMANCE | |
| DRI Test Standard | US NVESD Measurement Standard |
| DRI Target Size Basis | 1.7 × 0.5 m (human target) |
| Detection Range | 7,600 m |
| Recognition Range | 1,900 m |
| Identification Range | 1,180 m |
| INTERFACE | |
| Interface Type | RJ45 Ethernet, WiFi, optional 4G |
| Network Protocol | ONVIF / RTSP / PELCO |
| LOW-LIGHT PERFORMANCE | |
| Min. Illumination | 0.001 lux @ 25 fps |
| Frame Rate | 25/30 fps, up to 60 fps |
| Dynamic Range | 72 dB (WDR off) / 100 dB (WDR on) |
Designed for the Field
Long-Range Perimeter and Border Surveillance
Provides continuous full-colour situational awareness across wide open perimeters and border lines after dark, without relying on visible IR illumination.
Maritime and Critical Infrastructure Monitoring
Extends coastal and facility-perimeter monitoring into low-light and night conditions where conventional daylight cameras lose usable image detail.
Fixed-Mast Integration for Security Networks
Integrators mount the camera on masts, towers, or elevated structures and bring it into existing ONVIF-based command-and-control and VMS platforms.
Border & Perimeter Surveillance
Long, unlit stretches of border or perimeter fence are difficult to monitor once daylight cameras lose usable contrast. The XHC3240C-ABF is built to hold a full-colour picture across that same ground well after dark, without a visible illuminator giving away the camera's position. Its 7,600 m detection range and 0.001 lux colour sensitivity are what make continuous coverage of long straight-line perimeters practical from a single fixed mast. AI body detection with cross-border and regional alert zones lets operators set automated triggers instead of watching a static feed.
- Detection Range 7,600 m
- Recognition Range 1,900 m
- Min Illumination 0.001 lux
- Operating Range −40°C to +70°C
Maritime & Infrastructure Monitoring
Ports, coastal facilities, and critical infrastructure sites need dependable night coverage across open water or wide yard areas where lighting is impractical or undesirable. The same starlight-class sensor that suits border work applies equally to maritime approach monitoring and perimeter fencing around substations, plants, and depots. A native dynamic range of 72 dB, extending to 100 dB with WDR enabled, keeps the image usable against reflective water and mixed lighting at dusk or dawn. RJ45, WiFi, and optional 4G connectivity support both fixed-site cabling and temporary or remote installations.
- Dynamic Range 72 dB, 100 dB with WDR
- Identification Range 1,180 m
- Connectivity RJ45, WiFi, optional 4G
- Max Illumination 100,000 lux
Fixed-Mast VMS Integration
System integrators building or upgrading a surveillance network need a camera that drops into existing video management software without custom drivers. The XHC3240C-ABF speaks the same protocols used across most commercial and government VMS deployments. ONVIF compliance, RTSP streaming, and PELCO protocol support cover the majority of third-party platforms, while an SDK is available on request for deeper custom integration. Auto Back Focus lets the same unit be commissioned and refocused remotely after mast installation.
- Protocol Support ONVIF, RTSP, PELCO
- Focus Motorised Auto Back Focus
- SDK Available on request
- Storage 32 GB default, up to 128 GB
System Integration
Interface Architecture
The XHC3240C-ABF outputs over standard IP networking with ONVIF, RTSP, and PELCO protocol support alongside an optional SDK for deeper platform integration.
Full configuration and debug-level interface detail is available to verified corporate accounts.
Network Video Interface
Streams live video over RJ45 Ethernet using RTSP, with ONVIF compliance and PELCO protocol support for third-party VMS platforms. WiFi and optional 4G provide unwired connectivity where fixed cabling isn't practical.
Documentation & Downloads
All documents require a registered account. Export-controlled documents require verified end-user certification.
Request a Quote or Demo Unit
Our technical sales team can arrange a field demonstration, provide deployment planning, and prepare a formal quotation for your procurement requirements.
Contact Sales TeamSign In to Your Account
Access restricted integration resources and downloadable documentation for verified corporate customers.
Don't have an account? Apply for corporate access →
Apply for Corporate Access
Complete the form below. Your application will be reviewed within 1–2 business days. A corporate email address is required — free webmail addresses are not accepted.
Already have an account? Sign in here →